SAFERA Smart R User Manual Download Page 6

6

2.5  The Child Proof Lock

it is not possible to use the cooker or the 
oven, when the indicator light for child 
proof lock 

 is on. You can switch the lock 

on or off by pressing the child lock button 

.

2.5.1  Automatic Child Proof Lock

if the automatic child proof lock is in use, it 
will switch on automatically either

•  10 minutes after using the cooker or
•  an hour after using the oven.

By default, automatic child proof lock is 
disabled. You can enable the automatic 
child proof lock by pressing and holding 
the child lock button 

 for 5 seconds until 

you hear two high beeps (••). This way you 
can also disable the automatic child proof 
lock (one low signal).

2.5.2  If the child proof lock has prevented 
cooker use

if the indicator light for child proof lock 

 

blinks, someone has tried to use the cook-
er or the oven while the child proof lock 
was on. as a result, the cooker power was 
switched off. First turn all the hob switches 
in the zero position. after that, you can re-
turn the power by pressing the child proof 
lock button 

.

3. stove GUard desCriPtion

saFera stove Guard observes the tem-
perature changes and the use of the cook-
er. the stove Guard automatically gives 
an alarm and switches off the cooker and 
the oven in a hazardous situation based on 
temperature changes and also if

•  the cooker is left on for over 3 hours 

without anyone using it,

•  the cooker has been on for over 5 

hours, or

•  the oven has been on for over 12 hours 

without anyone using it.

3.1  Setting the Alarm Limit

to ensure safe and reliable operation, you 
need to set the alarm limit to match the 
location of the cooker in the kitchen. the 
alarm limit may also be adjusted in case 
of frequent false alarms. see installation 
manual for further information.

 

ѥ

WARNING

The Stove Guard is controlling the oven 
only if the oven is connected to the power 
control unit 

.

The cooker’s hot-hob indicators do not 
work after the Stove Guard has switched 
off the cooker. The hobs may still be hot.

 

ATTENTION

The Stove Guard is designed to avoid rais-
ing unnecessary alarms. This means that 
it allows the temperature to rise quite 
high during cooking without raising an 
alarm. It does not sound an alarm until it 
looks like the situation may cause danger 
to the surroundings.

Summary of Contents for Smart R












Reviews: