7.
7a
7b
7c
Open the Override Adjuster Cover to give slack in the cable. Ensure that the Override Cable
Using the the Fine Tune Adjuster (2.5-2), adjust to the point that when the handle is squeezed and
just touching the bottom of the wheelchair grip, the Lock Pin (2.3-5) is fully pulled into the Lock Pin
Assembly. (Fig. 15)
Fig. 13 Fig. 14 Fig. 15
Adjusting the Override Assembly
is running as shown in Fig. 13 below.
Once the cable is correctly aligned, insert the cable end into the appropriate slot in the Override
Adjuster and close the cover. (Fig. 14)
Page 8
