4.
4a
4b
5.
5a
5b
handle and secure with the screw. (Fig. 4)
Install the Paddle Assembly (DO NOT TIGHTEN AT THIS POINT)
With the Clamp removed, place the Paddle Assembly on the upper bar of the wheelchair frame
behind the crossbrace. (Fig. 5)
Fig. 3 Fig. 4
Thread the Mounting Screws through the Clamp into the Paddle Assembly fingertight. (Fig. 6)
Fig. 5 Fig. 6
Install the Override Assembly onto the wheelchair handle
The Override Assembly Adjuster Cover opens for adjusting
Open the Override Assembly Adjuster and give enough slack in the cable to mount the Override Bracket
onto the handle of the wheelchair. (Fig. 3)
Using the screw in the Override Assembly Bracket, spread the bracket and position over the wheelchair
Adjustments will be made later in the installation
i
i
Page 6
