MAXILUBE
IF-105
MUIF3AEN.doc
21.4.2005 Rev. 3A
8 (9)
4 SETTINGS
4.1 General
Set values are lubrication channel basic values, for example lubrication cycle and maximum
pressurization time. Set values are channel specific.
All settings are password-protected.
4.2 Entering password
1. Select the code for the setting to be changed on the display with
Ï
-button.
2. Press
SET
–button.
3. Display shows code
PPP
.
4. In a moment the first character of the display starts to blink.
5. Select
with
Ï
-button the first number of the password on the display.
6. Move to the next character with
Î
-button.
7. When all three numbers of the password have been entered, press
SET
–button.
8. When password has been entered correctly, code
ACC
is displayed and set values can be
changed during the next 10 minutes.
9. If password has not been entered correctly, code
Err
is displayed and display returns to
normal mode.
Note
Set value password is
105
.
4.3 Entering settings
1. Select the code for the setting to be changed on the display with
Ï
-button.
2. Press
SET
–button.
3. The first number of the value to be set is blinking on the display.
4. Select the desired number with
Ï
-button on the display.
5. Move to the next character with
Î
-button.
6. The set value is saved in the memory with
SET
–button.
7. Exit setting mode with
Î
-button. The display returns to normal mode automatically after
4 minutes if the buttons have not been used.
4.3.1 Lubrication cycle counter
Lubrication cycle counter can be reset when needed.
1. Select the code
Cou
for lubrication cycle counter on the display with
Ï
-button.
2. Reset the counter with
SET
–button.
Summary of Contents for MAXILUBE IF-105
Page 11: ......
