Available users, default codes and permissions
Super Master Reset Code (Optional)
•
Default code:
5-5-5-5-5-5-5-5
•
To activate the Super Master Reset Code, it must
be changed before the Manager code is changed.
The code can then be used to reset the lock if the
Manager code is lost.
Manager
•
Default code:
1-2-3-4-5-6
•
Open the lock, change own code
•
Manage the user (Add, delete, disable, enable)
User (Optional)
•
Default code: None, the user is deleted and can
be added by the Manager
•
Open the lock, change own code
Warning:
The Manager code should be changed
from the default to prevent unauthorised access.
Visual and acoustic signals
Beep + LED flash:
Button pressed correctly
Double beep + double LED flash:
Code or command entered correctly
Triple beep and triple LED flash:
Code or command entered incorrectly
Open the lock
Manager/User
Depending on the construction of the safe or vault,
other locks such as key locks may need to be opened
first.
•
Enter a valid 6-digit code
A double beep will sound
if accepted
•
Within 4 seconds, turn the keypad and/or turn the
safe handle
Any actions required to open the door and lock
should be reversed to close and secure the door and
lock.
Change code
Manager/User
Opening codes should be changed and tested with
the safe or vault door open where possible.
Method 1
•
Enter 0-0-0-0-0-0
A double beep will sound, and
the LED will stay on
•
Enter the current code
A double beep will sound
•
Enter the new code
A double beep will sound
•
Enter the new code again to confirm
A double
beep will sound, and the LED will turn off
Method 2
•
Enter the current code and hold down the last digit
for 3 seconds
A second set of double beeps will
sound and the LED will stay on
•
Press 0
A double beep will sound
•
Enter the new code
A double beep will sound
•
Enter the new code again to confirm
A double
beep will sound, and the LED will turn off
Test the new code whilst the door is open.
Add User
Manager
•
Enter the Manager code and hold down the last
digit for 3 seconds
A second set of double beeps
will sound and the LED will stay on
•
Press 1
A double beep will sound
•
Enter the new user code
A double beep will sound
•
Enter the new user code again to confirm
A double
beep will sound, and the LED will turn off
Delete User Manager
If the User’s code is no longer required, it can be
deleted
•
Enter the Manager code and hold down the last
digit for 3 seconds
A second set of double beeps
will sound and the LED will stay on
•
Press 3
A double beep will sound and the LED will
turn off
Disable User
Manager
The User code can be temporarily disabled.
•
Enter the Manager code and hold down the last
digit for 3 seconds
A second set of double beeps
will sound and the LED will stay on
•
Press 2
A double beep will sound and the LED will
turn off
