18
© 2012 SafeLine and all the SafeLine products and accessories are copyrighted by law.
1
2
3
4
5
1
2
3
4
5
Programming
ENGLISH v.1.01
remoTe confiG. WiTh TelePhone firST STeP
•
In order to remotely confi gure the SafeLine, the unit must fi rst be put into confi guration mode via voice
communication mode. To enter voice communication mode, refer to the instructions below.
•
After the unit has been set in voice communication mode, follow the steps for remote confi guration
on the next page.
Dial the phone number of the
SafeLine
Multiple
SafeLine connected to phone
number?
1 short beep,
fi rst SafeLine answers
Press unit number [1-9].
3 long beeps,
SafeLine answers
Voice communication mode
entered
Dial the phone number of the units phone or
GSM subscription.
If there is only one unit connected, the unit
answers with 3 long tones.
If there are multiple units connected, the unit
answers with a short beep.
If there are more than one unit connected to
the phone number, use the unit number to
communicate with the selected unit.
When 3 long tones are heard, the selected
unit are reached and voice communication
mode is established.
Now the telephone beeps every 5 seconds.
This is to notify the passengers of the ongoing
call (anti eaves dropping).
After 2 rings the unit answers with a short
beep.
If multiple SafeLine TTR units connected in
parallel you have to press the unit number just
once.
If there are other units (E.G SafeLine 3000,
MX2) connected in serial you may have to
press the unit number several times before
the 3 long tones are heard.
Incoming call to SafeLine