12
SafeLine LEO 4 v.1.02 EN
Configuration
Sound
Application sounds
The application and used Linux driver supports multiple sample
rates and channels, but it is recommended to use: 16kHz sample
rate/8 or 16 bit/mono.
Start-up
At start-up the unit can play a sound or jingle.
Call button acknowledgement
The acknowledgement tones from pressing a call button is generated
internally. The level, frequency and length can be set by the user.
Announcement
All sounds for floors, arrival and special messages must be placed
on the SD card.
Floor names
With CAR displays, the announcement of arrival to floor may be
used. The sound of each individual floor can be set and freely
selected by the user in any language (given the right language is
available on the SD card).
Special messages
Sounds for special messages, if used, can be set freely to any
sounds that are available on the SD card.
Arrival sound
Floor arrival sounds are normally used on FLOOR displays, and can
freely be set to any sound or voice output. Alternatively an
internally generated “gong” may be used.
