6
© 2014 SafeLine and all the SafeLine products and accessories are copyrighted by law.
FD4-CAN v1.06 EN
Configuration
SETTINGS
General settings are made by CAN-wizard.
Settings and audio files can be saved on the micro SD-card.
Micro SD-card
The memory card contains the following folders:
CFG
WAV
FIRMWARE
CFG
In CFG is where the file CONFIG.FD4 is located. It has all the settings of the unit. If an empty memory card
is inserted, the unit will by default create a catalog and write a “CONFIG.FD4-file.*
WAV
In WAV is where any sound files, used by the unit, are located. Audio files have to be in the WAV format
(16bit, 16kHz mono), and correspond to the search path given in CAN-wizard.
FIRMWARE
When needed updated software can be added here to update the unit.
Update of software:
1. Disconnect the power to FD4-CAN.
2. Insert a micro SD card, that has the new software located in the folder named FIRMWARE
for eg. “X:\FIRMWARE\FD4-CAN-03_1.0.0.bin”
3. Press and hold the down-button on the backside of the FD4-CAN, and power up the unit. Hold the
down-button until the upper part of the display reads “BLT” and the lower half reads the software
version. Then release the down-button. The unit will now start.
*For transfer of settings between units see chapter “Replacing FD4-CAN”.
