Frothing Disk Storage
FROTHING DISK
STORAGE
For convenience
the unit has
storage built-in
underneath the
power base.
Using Your Automatic Milk Frother
SETUP
1. Position the power base on a flat, heat resistant surface, as close as possible
to a power outlet.
CAUTION:
Do not operate appliance if power base is not flat.
2. Install frothing disk into the base of the frothing cup.
CAUTION:
CHOKING HAZARD - Small parts. Not for children. Use with adult
supervision only.
3. Add fresh cold milk to the desired level and place lid on top.
CAUTION:
Do not exceed the "MAX" scale at the bottom when stirring the
milk, and do not exceed the "MAX" scale at the top when heating the milk.
4. Plug the electric cord into an electric outlet. All lights will light on and then
off. LED light will light on cappuccino cycle as default.
5. Place the trothing cup on the power base and select your prefer cycle.
6. Milk frother is now ready to use. Enjoy it!
NOTE
The unit will be in standby mode for 30 minutes and then it will turn off
automatically. All LEDs go OFF. The unit can be activated anytime by pressing
either button.
7
