SafeCom 8200DN - Aficio SP B/W Laser Printer, Administrator'S Manual, Page: 43 / 62

2 SafeCom Go Ricoh
D60703-17 43
2.8.15 Control user access rights
When using SafeCom G3 Server version S82 070.440*03 or newer, you can
control users’ access rights to specific features via SafeCom Administrator,
refer to
SafeCom G3 Administrator’s Manual D60603 . You can control access
rights to the following features:

Copy

E-mail

Scan

Fax

Print all
2.8.16 Enable single sign-on for Nuance DigiDocFlow
1. Open the Advanced web page (2.7.10).
2. Enter Computer IP address and Port (default 21) of the computer hosting
the Nuance DigiDocFlow solution.
3. Enter User name and Password required to access the Nuance
DigiDocFlow solution. The External authentication section is only used
for NSi AutoStore (2.8.16). Leave Enable unchecked.
4. Click Apply .
2.8.17 Enable single sign-on for NSi AutoStore

From SafeCom obtain the file scNotifyExtAuth.dll.

From NSi AutoStore obtain the client
2
package that contains ASEQAT.exe.
Note: Both SafeCom server and AutoStore MUST be in the same domain
3
.
SafeCom service MUST be started by a user with remote access rights on the
AutoStore server.
The steps below need to be repeated on each SafeCom server:
1.
Run the ASEQAT.exe as administrator and enter the IP address of the
AutoStore Server. After installation you should see a new service called
ASEQAT .
2. Stop the SafeCom Service and copy the scNotifyExtAuth.dll into the
SafeCom installation folder.
3. Right-click SafeCom Service and click Properties .
4. Click Log on tab and click This account . Enter the name and password of
an account that has remote access rights on the AutoStore server.
5. Click OK .
6. Restart the SafeCom Service.
Note: The SafeCom Service loads the IP address of the AutoStore server when
it is started. This implies that a change of the AutoStore server’s IP address
should be followed by a restart of the SafeCom Service.
2
The client package is generic in nature, but is most likely known as ”AutoStore
EquiTrac Client”.
3
At this point in time no testing has been performed with trusted domains.