Safe Living Technologies Inc.
© 2019
Fig. 1A
Fig. 1B
Body Voltage Measurement Instruction
Assembly of Equipment
- Connect one end of the red test lead to the jack of the Body Voltage Meter labeled “
V
Ω
Hz
” and the
other end to the Aluminum Hand Probe
(Figure 1A, 2A)
- Connect one end of the black test lead to the jack of the Body Voltage Meter labeled
“
COM
”
and clip the other end to the Electrical Ground
(Figure 1A, 1C)
or the Ground Peg via the
Alligator Clip
(Figure 2A, 2B) - See below
Fig. 1C
Insert
Into
Outlet
Note:
The Outlet Ground may have a small voltage on it which can cause deviations in
the actual readings. As an additional option, a Ground Rod/Peg can be used. This rod/peg
is physically inserted into moist soil outside of the home and provides a direct connection
to the earth. The best ground reference point is the one that yields the highest reading.
Caution! Test Outlet Before Inserting Ground Plug Into the AC Electrical Outlet (Fig 1B)
Outlet Ground Assembly (1)
2 Lights ON Indicates
Correct Wiring
Configuration
Page 2
Ground Peg Assembly (2)
Caution: Test Outlet to Verify Correct Wiring
Do Not Proceed Unless Outlet is Verified
Fig. 2B
Fig. 2A