Safe Fleet VT-7, Quick Installation Manual

Page: 1 / 2

Mobile Data Terminal
Quick Installation Guide
Service & Support
If your Mobile Data Terminal is to be returned for service, please contact the Seon technical support
team, provide the part and/or serial # of your unit, and ask for a Return Merchandise Authorization
(RMA) number.
An RMA # allows the support team to better track your product when it comes in for service. Please
show the RMA # on the outside of the package.
ANY PRODUCT SENT WITHOUT AN RMA # MAY BE REFUSED!
Documentation and Warranty
Additional copies of this guide along with other documentation and product warranty can be found on
the Safe Fleet Community website: https://community.safefleet.net
Technical Support
Phone : 1.844.899.7366 Email : PTsupport@ safefleet.net
2002/96/EC (WEEE directive): This product cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return the product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points, for more information, see www.
recyclethis.info.
2006/66/EC (battery directive): This product does not contain batteries.
January 2021 | Part #: 700-1210 R2 © Safe Fleet | All rights reserved
Product Overview
This guide covers installation of the mobile data terminal (MDT), a portable 7” tablet, intended for use
on school buses, transit buses, and commercial vehicles.

IMPORTANT! Completing the installation
After you complete the installation steps described in this document, verify that the software,
installed on the MDT, is accessible and functional. To do so, visit the following links and follow the
described procedures:
• For student tracking: https://community.safefleet.net/tutorial/install-mdt-student-tracking
• For vehicle inspection: https://community.safefleet.net/tutorial/install-mdt-vehicle-inspection
• For Navigator: https://community.safefleet.net/tutorial/install-mdt-navigator
MDT Package Contents
VT-7 Android tablet
VT-7 docking station (includes two lock keys)
USB type C cable (1 pc.)
SD card slot cover screw KM2 x 5mm (2 pcs.)
Hexagon L-key for use with SD card slot cover screws (1 pc.)
Preinserted 64GB microSD card (1 pc.)
Preinserted carrier SIM card (if data option is ordered) (1 pc.)
Mounting assembly:
• Mounting arm kit (includes an arm and two base plates)
• Tri-groove tamper-resistant nut (1 pc.)
• Tamper-resistant Torx screws M4-0.70 x 10 (4 pcs.)
• Spring lock washers M4-4.3 mm ID, 9 mm OD (4 pcs.)
• Self-tapping security Torx screws #10-1 (4 pcs.)
Optional, available for purchase:
• Tri-groove 10-24 nut driver (P/N 890-1000)
Power harness kit:
• Cable, 16 AWG, with 2x2 mini-fit connector – 20 ft/6.1 m
• Butt splice connectors (2 pcs.)
• Fuses - 3 A (2 pcs.)
• Fuse holders (2 pcs.)
5. Take a note of the device ID: write down the last 8 digits of the IMEI number located on the white
barcode sticker attached to the bottom of the tablet.
IMEI: 6703865 22640780 S/N: 6703865 22640780
6. To insert or remove the tablet:
i. Use the supplied key to unlock the spring-loaded
release tab on top of the dock.
ii. Pull back the tab and insert or remove the tablet.
iii. Lock the release tab using the key.
IMEI number
sticker location
Device ID
IMEI: 6703865 22640780
Locking release tab