PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: 651-552-8554 ▪ 1.8.PRIME.RACK ▪ Fax: 651-552-1799 ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2016 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6092974, 6764268, 6971563, 2364879, 8857689, 8511525, 8991889 AND OTHER PATENTS PENDING
4
UVX-211
ASSEMBL
Y INSTR
UCTIONS–MOUNTING
TO UTILITY BOD
Y
M8 x 30MM Bolt
Sealing Washer
Mounting
Utility Body
Neoprene Washer
Fender Washer
M8 Locknut
Mounting Hardware (8X)
96.00”
84.00”
72.00”
96.00”
84.00”
72.00”
Rear Lower
Front Lower
3.50”
3.50”
UTILITY BODY MOUNTING
6.00-8.00 Ft: Drill holes into the Service Body
mounting location according to dimensions shown.
0.1
0.4
Torque to 90 in-lbs
0.3
Using the fastening hardware shown below,
attach the vertical Uprights to the Utility Body.
The Neoprene Washer, Fender Washer, and
Locknut install from the inside of the Utility
Body in the order shown, while the Bolt and
Seal Washer install from the outside.
0.2
Position and align the vertical
Uprights until the mounting holes
realign to the body holes drilled
during Steps 0.1.
Summary of Contents for PRIME DESIGN UVX 211
Page 1: ......
