Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
10
PRR-0005
ASSEMBL
Y INSTR
UCTIONS–RIGHT SIDE RO
TA
TION
Torque to
80 in-lbs
8.8
Slide the L Post until parallel
to the Auto Clamp and the
gap between the two is
even from top to bottom.
8.7
Repeat steps 8.1
-
8.8 for
the front L Post installation.
8.9
Ensure both Z Post Mounting
Clamps are fully seated into
the top groove of the Upper.
9.1
Slide the Z Post into the Mounting Clamp Assembly.
Refer to the Quick
Start Guide for Z
Post positioning.
9.2
9.3
Torque to
90 in-lbs
Repeat steps 9.1
-
9.3 for
the front Z Post installation.
9.4
Z POSTS
SEE QUICK START GUIDE FOR ADJUSTMENTS
Adjust the Cylinder Flow
Control Screw to allow
approximately 3 seconds
time for the ladder to glide
down when operating the
loaded Ladder Rack.
10
CYLINDER ADJUSTMENT
Summary of Contents for Prime Design PRR 0005
Page 15: ...Page Intentionally Left Blank ...
Page 16: ...USAM PRR0005 US01 Rev C 0618 ...
