Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
14
Rear
Front
Crossbar Rear
Crossbar Front
47.00”
4.50”
55.67”
66”
42”
FBM-1007-BLK
ASSEMBL
Y INSTR
UCTIONS–L2H2 UNIVERSAL FBM
1.7
1.6
Slide Channels onto
Mounting Brackets
1.9
Torque screws to 90 in-lbs
Slide the upper and lower
Channel Connectors into
Channels and align holes
1.10
Set to distances shown below, then torque Mounting
Bracket nuts loosened at Step 1.5 to 80 in-lbs
1.8
Screw the M8 x 40MM Allen Head bolts into the Upper
and Lower Channel Splices. Due to tight manufacturing
tolerances, both bolts must remain loose until Step 1.9
1.5
1.4
Torque to
80 in-lbs
1.3
Do not tighten
Slide and position the Channel Connector into the
Mounting Body as shown, then screw the 30MM Flat
Head bolt into the Base Puller.
