Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
Rear
Front
Bolt M8 x 55MM
Bolt M8 x 40MM
M8 x 35MM
Sealing Washer
Foam Pad
Neoprene Washer
Fender Washer
M8 Lock Nut
Set according to vehicle or cap
manufacturer’s recommended
mounting positions
96.00”
5.00”
PRI-255-UM3
ASSEMBL
Y INSTR
UCTIONS–MOUNTING BRA
CKETS
UM3 MOUNTING BRACKETS
MOUNTING BRACKETS TO ROOF
0.4
Assemble onto vehicle roof as shown, then torque the Mounting
Bracket nuts to 130 in-lbs.
Assemble the Mounting Top to the Mounting Post using the
hardware as shown below.
0.2
Assemble the Mounting Post to the
Mounting Foot using the hardware
as shown below.
0.1
0.3
Drill bolt holes according to the dimensions shown.
