PRIME DESIGN, A SAFE FLEET BRAND
▪
Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: [email protected]
▪
Website: www.primedesign.net
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
USAM-OCM3032-US01 Rev-A 0220
Variable Placement
Flush to end
OCM-3032
ASSEMBL
Y INSTR
UCTIONS–ASSEMBL
Y INSTR
UCTIONS
ADD-ON CROSSBAR INSTALLATION
3
Install Mounts into Channels
as shown below.
4.1
Set Crossbars into the Mounts
as shown and torque Crossbar
Connector Hardware to 90 in-lbs.
Attach Ladder stops as shown
and torque to 90 in-lbs.
4.2
5
Set to distances as shown below, and torque all Removable Crossbar Mounts into the Channels at 90 in-lbs.
NOTE: Channels and FBM are shown for reference. Specific channels and configurations are determined by
Service Body size.
