Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
5
(H) 6’–8’
(F) 4’–5’
(G) 2’–4’
FBM-1030
ASSEMBL
Y INSTR
UCTIONS–UTILITY ROOF MOUNTINGS
NOTE: Recommended Bolt head facing:
Rear Mounts–Bolt heads face rear
Front and Center Mounts–Bolt heads face front
2.1
2.5
2.6
This rack model can be set for a Crossbar spacing distance
of 6’ to 8’. Dimensions F and G illustrates the Rear to
Center, and Center to Front Crossbar allowable spacing.
Dimension H illustrates the maximum allowable Crossbar
spacing from the Rear to the Front Crossbars.
Attach Crossbar Clamps to the Mounting Brackets
with the Carriage Bolts, Flast Washers and Locknuts
as shown.
Finger-tighten Clamp Hardware. Do not torque until
Crossbars are mounted.
2.2
The Front and Center Mounting Brackets
preparation sequence is identical to that
shown in Steps 1.3–1.5
2.3
The Front and Center Mounting Brackets
installation sequence is identical to that
shown in Steps 1.6–1.8
To install the left hand Front and Center Mounting
Brackets to the vehicle body, repeat Step 2.1 for
dimensioning, then Steps 1.4–1.8 for the Mounting
Bracket installation.
2.4
