Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
14
DPS-8000 ASSEMBL
Y
INSTR
UCTIONS–STEP
LADDER ADJUSTMENTS
Loosen but do
not remove
End Caps
Torque to
90 in-lbs
Loosen but do
not remove
1.3
1.5
1.4
1.6
Slide the Center Ladder Holder to sit flush with the Rear Ladder
Holder as shown below.
Remove the End Caps from one side of the Rear and Center
Ladder Holders. Move the End Stop on that side from the Rear
to Center Ladder Holder and replace End Caps as shown below.
Loosen the indicated Bolt from the Connecting Bracket
Hardware on the Rear and Center Ladder Holders, slide
outward to their ends as shown below, and torque
hardware to 90 in-lbs.
