Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
6
C
D
Left Rear
Figure A
48.00”
7.3
Loosen
Nuts
7.2
Torque to
120 in-lbs
7.5
CBR-0011
ASSEMBL
Y INSTR
UCTIONS–LEFT SIDE RO
TA
TION
CENTER CROSSBAR
6
Install small .75” (C) and large 1.50” (D) round Caps into the
Front Crossbar holes as shown.
FRONT CROSSBAR
7.1
Remove and retain Channel End
Caps and screws for Step 7.4
Loosen bolts
Slide front Mounting Brackets
and adjust as shown in Figure A.
7.4
Place the new Mounting
Brackets under the Front
Crossbar as shown then
reinstall the End Caps.
Loosen bolts
Summary of Contents for PRIME DESIGN CBR 0011
Page 11: ...Page Intentionally Left Blank ...
Page 12: ...USAM CBR0011US01 Rev A 0618 ...
