© Safe Fleet | March 2020 | All rights reserved | Part # 700-1209 R1
How to install
Before starting the installation, prepare the following components:
•
32” Public Display Monitor and its Quick Installation and Configuration Guide
•
Universal Mounting Bracket and its Installation Guide
• Supplemental Wall Plate.
1
Prepare bracket components and drill holes.
To do so, follow steps
1
-
2
of the
MVQ-V200-MTPLT Mounting Bracket Installation Guide
.
2
Install the wall plates.
Refer to the diagram below.
a. Hold the monitor’s wall plate against the mounting surface so the wall plate holes are aligned with the drilled holes.
b.
Thread a supplied M6 mounting screw through a supplied flat washer.
c. Insert the screw with the washer into one of the holes in the monitor’s wall plate and then into the appropriate drilled
hole.
d. Align the corresponding hole of the supplemental wall plate with the protruding mounting screw on the other side of
the mounting surface.
e. Place the supplemental wall plate onto the protruding screw.
f.
Place another flat washer and then a split lock washer onto the protruding mounting screw.
g.
Thread a supplied M6 nut onto the protruding screw and finger tighten it.
h. Repeat steps
b
-
g
for the remaining screws.
i. Using appropriate tools, fully tighten the nuts.
3
Connect and configure the monitor.
To do so, follow steps
2
-
8
of the
32” Public Display Monitor Quick Installation and Configuration Guide
.
4
Mount the monitor.
To do so, follow steps
4
-
5
of the
MVQ-V200-MTPLT Mounting Bracket Installation Guide
.
Monitor
side
Cabinet
side
