VLP2 Wireless Microphone
Rev. 4.25.2019
P a g e 4
For information on Mobile-Vision’s warranty and replacement options regarding
VLP2s, refer to the Flashback Digital Evidence Collection System warranty.
VLP2 Light Indicators
On the top of the VLP2, there are two light indicators: the
Mute/Sync
indicator, and
the
Error/Battery
indicator.
These light indicators and their meaning(s) are described in the following table.
Indicator
Color
Meaning
Solid green
Signal between the wireless mic and docking
station is good. The two devices are in sync.
Blinking orange
Audio is temporarily muted. This occurs when you
hold the Record button
down
while a recording is
in progress.
Blinking red
Signal between the wireless mic and docking sta-
tion is marginal and audio is likely interrupted.
This occurs because you are nearly out of range or
there is a barrier of some sort (metal, for example)
interrupting the signal from the mic to the docking
station. To regain a reliable audio connection,
move back within range of the docking station. If
the
SYNC
light blinks green four times and then
stops, you have successfully synchronized the mic
with the docking station. If the
SYNC
light contin-
ues to blink, it usually indicates that either the
Power switch on the VLP2 is
off
or the VLP2’s
battery is dead. If, upon investigation, you find that
the battery is good and the Power switch is
on
as it
should be, examine the pins at the base of the
charging station, pictured left. If one or more of
these pins is pushed down or corroded, it could be
the source of your problem. Try cleaning the pins
with a clean cloth dipped in isopropyl alcohol. If
that doesn’t work, contact Mobile-Vision Support
for further assistance.
Blinking red
Lapel mic has failed
or
battery is low. If the Lapel
mic fails, the audio source will automatically
switch to the VLP2’s internal mic.
