JUL 2023 | R1.7
© Safe Fleet | All rights reserved
2. Installing FOCUS H2 In-car Video System
FOCUS H2 Installation Guide
p. 7
2.5 Mounting the Front Camera
To mount the front camera, follow these steps:
1.
Install the flat plate by removing the visor clip and placing the plate around the hole. Mark and drill pilot holes first to
make the self-drilling screws easier to install. Once this is mounted firmly, replace the visor clip.
2. Install the carriage bolt through the front center hole pointing down as shown in the image above. Do not install a
washer between the carriage bolt head and the flat plate.
3. There are 2 operating options for the end user to choose from:
Pan/Tilt
option: In order for the end user to be able to aim the camera, it allows panning and tilting of the camera when
the kit is assembled as Section (a) below. One set of white plastic washers are installed in a way to allow right/left
panning. The other set of white plastic washers are installed in way that allows forward/backward tilting.
Fixed
option: Fix the position of the camera during installation as Section (b) below so that it cannot be moved by the
end user.
a.
To mount the front camera using the
Pan/Tilt
option:
i.
Install the hanging bracket with a set of white plastic washers, a split washer, and a locking nut to the carriage
bolt installed in Step 2 as shown in the figure below.