Safe-Com Wireless Public Safety Fiber Distributed Antenna System
6-20-18 page 20
Installation
Installation - Wall-Mounting:
When mounting the Remote on the wall, it is critical to provide
spacers between the unit and the wall. A one inch space is
appropriate to allow for air flow.
Power is hardwired into the unit. The power applied is based on
the
model number ordered. Consult the order number and the
company data sheet to confirm power type. Options include
120VAC, 12VDC, -48VDC.
RF cable selection is based on the RF connector requested .
Default type is a panel mounted 50ohm SMA female. Therefore
the
RF cable required will be 50ohm SMA Male.
