7.Adjust the lens position to ensure that the
camera covers the entire view from the rear and
front of the vehicle. Also ensure that the camera
is not recording too much of the vehicle’s bonnet.
8.Once all the wires are connected, switch the
vehicle on, the dash camera will start
automatically, with a red/blue light blinking on the
device.
Installation Precautions
1.Before installation, please check that you have
all accessories and that they are correct and
complete.
2.During installation please do not turn your
vehicle on until you are sure all the wires have
been connected as directed. Also do not pull out
any dash camera accessories while the device is
in the Power ON status. This includes rear
camera, SIM card, SD card and GPS antenna.
3.When the vehicle is turned on, the dash
camera will automatically turn on. Please check
whether the function of the power on/off, the front
and rear camera displays are working. (You will
have to check this via the mobile app if the
camera does not have a screen)
4.When the device is in use and the power is on,
it is forbidden and dangerous to pull or insert the
