background image

ON/OFF

Button

Battery 

Compartment

LCD

Thermometric

Sensor

Thermometer tip

Flexi tip

Directions

The unit is switched on and off with the button alongside the display window. The start-up screen will appear on the LCD 

display and a beep will be heard.

Upon releasing the on-off button if the thermometer has been used previously, the last measured temperature will be shown for 

about 2 seconds.

When        appears and    symbol blinks, the thermometer is ready to use.   

If         appears, it means the room temperature is below 32°C.        will be displayed if the room temperature is greater than 42.9°C. 

If the room temperature is between 32°C and 42.9°C, the reading will be shown.

If the thermometer displays over 35°C, dip the thermometer tip in cold water for approximately 5 seconds prior to measuring 

your temperature.

Do not eat or drink anything before taking the measurement.

To ensure reading is as accurate as possible, place the thermometer tip under the tongue in the rear heat pocket to the left or 

right of the root. Keep the mouth closed. Wait for 1 minute or until you hear bleeping tones. After hearing the bleeping tones, 

wait 4 more seconds.

The unit may now be removed and the displayed temperature recorded.

The unit will auto power off after around 10 minutes of not being used.

Temperature can also be taken using underarm or rectal methods. Medical advice and information on the most appropriate and 

accurate methods of taking temperature should be sought from your healthcare professional or other suitable source.

ON/OFF

Button

Battery 

Compartment

LCD

Thermometric

Sensor

Thermometer tip

Lo

C

o

Lo

C

o

Hi

C

o

C

o

Instructions
CAREFULLY READ ALL THE INSTRUCTIONS AND WARNINGS ON THIS LEAFLET BEFORE USE.
This item is not waterproof, do not immerse in liquid. To clean, wipe whole unit with a damp cloth and wash probe only.

Wash probe thoroughly before first and each subsequent use with a damp cloth. Sanitise probe if required by wiping with cold 

water sterilising solution, 70% Isopropyl alcohol or similar method.

Store out of reach of children, in a cool dry place away from sunlight and direct heat sources.

Do not allow the device to come into contact with hot water.

Always consult your doctor concerning raised temperatures and any other worrying symptoms. It may be a good idea to 

establish and record your usual temperature regularly when not ill.

Whilst Individuals may vary, normal temperature is considered to be 37ºC. However, body temperature can vary from 36ºC up 

to the normal level.

A mild rise in temperature would be to about 37.8ºC and you should consult your doctor if your temperature remains at this for 

more than 24 hours or if your temperature rises to 38.6ºC.

Respiratory air may affect the accuracy of measurement. You are recommended to close the mouth for about 1 minute to let 

temperature in the mouth become steady.

Replacing The Batteries

The low battery symbol appears when the battery requires replacing.

Turn the thermometer face down and remove the end cap, slide the battery case out from the unit. If required, use only a 

non-conductive, blunt instrument, such as a toothpick or matchstick, to help with removing the battery.

The replacement battery should be of the same type (1.5V – LR41). Make sure “positive” side is facing upwards.

Push the battery case into the unit and replace the end cap.

Always take care when removing the battery cover as damage may occur if the unit is dropped or knocked against any hard 

surface.

Remove batteries if the unit is not being used for a long period of time to prevent them from leaking.

Do not throw away used battery in household waste. Dispose of the battery at your local waste disposal centre in the

appropriate battery dispose site.

Safe & Sound Digital Thermometer

SA8099

SA8097

Reviews: