NOTE:
Determine which type of seat bottom you have. Seat
bottoms have five threaded, two threaded or one threaded
hole(s) on each side. Refer to assembly instructions according
to type of seat bottom. All of the parts will
NOT
be used with
each version.
ASSEMBLY INSTRUCTIONS FOR SEAT BOTTOMS WITH
TWO THREADED HOLES ON EACH SIDE
Remove four screws mounting control mechanism to the seat.
IMPORTANT: Save the screws for later use.
Mount Armrest Bracket (A) under control mechanism with
notched side facing front of seat bottom. Align four holes in
corners of armrest bracket with two threaded holes on each
side of seat bottom. Attach armrest bracket to seat bottom
with four Screws (H), Lock Washers (J) and Flat Washers
(K)–but do not tighten screws completely.
Align four holes in control mechanism with four holes in seat
bottom. If control mechanism has two holes on each side
that line up with two threaded holes in armrest bracket,
secure with two Screws (H), Lock Washers (J) and Flat
Washers (K). Secure control to seat bottom with screws
saved in Step 1, unless control mechanism has two holes on
each side that line up with two through holes in armrest
bracket. If control mounting holes line up with through holes,
place two 5mm Spacers (I) under front mounting holes of
control and secure control with four screws saved in Step 1.
Make sure all screws are securely tightened, including four for
armrest bracket.
Align three slots in Left Armrest (B) with three threaded holes
on left side of armrest bracket and attach with Screws (C),
Lock Washers (J) and Flat Washers (K). Slide armrest to
desired width, then tighten screws securely. Repeat with Right
Armrest (G).
Please Note:
Fasteners should be checked periodically and
tightened as necessary.
For questions or concerns, please call the
Safco Consumer Hot Line 1-800-664-0042
available Monday - Friday 8:00 AM to 4:30 PM (Central Time) (English-speaking operators)
A S S E M B L Y I N S T R U C T I O N S
READ THESE INSTRUCTIONS BEFORE STARTING! FOLLOW THE ASSEMBLY PROCEDURES CAREFULLY
TOOLS REQUIRED:
Phillips Screwdriver
PRODUCT WARRANTY REGISTRATION
is available online at: www.safcoproducts.com
3
6683-37MP: 1 of 6;
05/04
6559.00
PARTS LIST
CODE
DESCRIPTION
QTY. PART NO.
A
Armrest Bracket
1
6683-20NC
B
Left Armrest
1
3499-02
C
6-1.0 x 16mm Phillips Hex Head Screw
6
6683-22NC
D
6-1.0 x 30mm Phillips Hex Head Screw
6
6683-23NC
E
15mm Spacer
6
6683-32NC
F
Steel Spacer
2
6683-31NC
G
Right Armrest
1
3499-03
H
6-1.0 x 16mm Phillips Pan Head Screw
6
6683-24NC
I
5mm Spacer
2
6683-33NC
J
6mm Lock Washer
10 6683-29NC
K
6mm Flat Washer
10 6683-30NC
Adjustable Armrest Kit
6683
2
4
1
•
•
Visit us on the web:
www. safcoproducts.com
•
Remove and Save Screws
H
K
K
J
J
I
G
C
A
B
Two Threaded Holes - Exploded Assembly View
Two Threaded Holes - Assembled View
