REAR
LEGS
FRONT
LEGS
K
J
1873-37: 2 of 2; 06/02
Safco Products Company, New Hope, MN 55428
5
NOTE:
First determine if you will pull the shelf out from
the left or right side. With the holes upward, slide the
Shelf into the unit between one Side Panel and the Top
Panel. Fasten the G Shelf Plate to the underside of
the Shelf using two H Screws.
Slide the C Back Panel into position between the Side
Panels as shown in
Drawing 1
(keep the Back Panel
inside the flanges on the Side Panels).
Fasten with two H Screws.
3
Slide the L Bottom Panel into
the unit between the Side
Panels, with the flanges toward
the Casters. Slide the flanges
of the shelf into the lower
flanges on the Side Panels and
Back Panel. Fasten the Shelf
to each Side Panel using one
H Screw per side.
Carefully turn the completed
unit upright.
7
4
Insert one I Rear Leg into one large hole in the Top
Panel and insert one H Screw through the upper
end of the Side Panel and Back Panel and into the
Leg. Repeat for the other I Rear Leg. Position the
D Shelf Support Rail to the inner side of the Side
panels as shown. Insert a H Screw through the holes
in each Shelf Support Rail, Side Panel, Back Panel,
and into each Leg.
Insert the stems of the J Casters without Brakes into
the Rear Legs attached to the Back Panel. Insert the
K Casters with Brakes into the Front Legs, and
carefully turn the completed unit onto its back side
as shown in Step 7.
6
ASSEMBLED UNIT
BACK
PANEL
BACK
PANEL
D
H
H
L
C
Drawing 1
H
I
F
G
H
