PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
STEP1
OPEN THE ZIPPER ON THE UNDERSIDE OF THE SEAT
AND TAKE OUT LEGS AND HARDWARE.
STEP2
PUT THE WASHERS ON THE BOLT IN THE ORDER
SHOWN IN THE PICTURE.
STEP3
INSERT THE FRONT LEGS AND SCREW IN THE BOLTS
. BUT DON'T TIGHTEN COMPLETELY.
STEP4
INSERT THE BACK LEGS AND SCREW IN THE BOLTS .
BUT DON'T TIGHTEN COMPLETELY.
STEP5
PUT THE CHAIR UPRIGHT AND MAKE SURE ALL
LEGS ARE LEVEL.THEN FIRMLY TIGHTEN BOLTS WITH
ALLEN KEY.WHILE THE CHAIR IS UPRIGHT AS PICTURED
ABOVE.
STEP6
CLOSE THE ZIPPER ON THE UNDERSIDE OF THE
SEAT, THIS ITEM MAY REQUIRE PERIODIC TIGHTENING.
The legs and hardware are located in the small box underneath
the chair in the zipper compartment.
