H1
H3
H7
H8
H1
H2 x2
H3
Step 3: attach the back (A) to the seat (B) as shown on the picture.
Then use the Allen Bolt L (H1) and the Allen Bolt S (H3) in the
middle , positons left and right use Allen bolt M ( H2) and tighten by
the Allen Key (H8) and the Wrench (H7) as shown on the picture.
Bolt S (H3) and the Allen Bolt M( H2) as shown on the picture.
A
B
C
C
Step 4: Lift up the Side (C) as shown the picture and put down to lock
the side on the seat (B) then can use this lounger same as this bench.
H2x2
H7
H8
H2 x2
Make sure put correct positions to use the Allen Bolt (H1) ,the Allen
C
C
3
4
