PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
STEP1
TAKE OUT LEGS AND HARDWARE FROM THE BOX
UNDER THE SEATBODY.
STEP2
PUT THE WASHERS ON THE BOLT IN THE ORDER SHOWN
IN THE PICTURE.
STEP3
PUT LEFT CHAIR ARM AND RIGHT CHAIR ARM ONTO
SEAT BODY .SCREW IN THE BOLTS . BUT DON'T TIGHTEN
COMPLETELY.
STEP4
SCREW IN THE BOLTS BETWEEN TWO ARM AND
TIGHTEN IT.
STEP5
PUT THE CHAIR UPRIGHT AND MAKE SURE ALL LEGS ARE
LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH ALLEN KEY WHILE
THE CHAIR IS UPRIGHT AS PICTURED ABOVE.
STEP6
ZIP THE COVEVR ON BOTTOM OF SEAT.THIS ITEM MAY
REQUIRE PERIODIC TIGHTENING.
The legs and hardware are located in the small box under the seat
body.
