PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assemble Time: 5 minutes.
1
2
Step 1
Step 2
1. Place the Headboard (A) flat on the floor covered with with a protective
1. Locate the Center support foot(E) onto the Cross Support Slat (D) as shown
material to prevent damage.
in the Diagram II
2. Stand the Headboard (A) upright and hook Side Rails (B) into Headboard
2. Place the Cross Support Slat (D) on the inside of the Headboard (A) and
(A) as shown in the Diagram I.
Footboard (B).
Tighten the Allen Bolts(2),with Allen Key(3)
Screw the ends of the slats to the cleats using Screw (1), as shown in
3. Repeat the procedure with the Footboard (C).
Diagram III.
Summary of Contents for KNT4039A
Page 3: ......
Page 4: ...D as shown...
