Installation
Step 1
Loose the Studs(M) to remove the polyfoam from the Frame(K)
Step 2
Install the mounting bracket(A) to the junction box with machine screw (B)
Step 3 Wire connection
Make wire connections, with wire connectors(F), following the reference chart listed below.
Connect,Hot,Black or Red outlet Supply Wire to:
Connect,Neutral,White Outlet Supply Wire to:
Black
White
*Parallel Cord(round&smooth)
*Parallel Cord(square&ridged)
Clear,Brown,Gold or Black without Tracer(colored stripes)
Clear,Brwn,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green)with copper metal conductor
Insulated Wire(not green)with Silver metal conductor
*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left)
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green ground screw on
mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied with a ground
wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green
grounding screw on mounting bracket. Tighten ground screw.
Step 4
Attach the backplate(C) to the junction box and fix it by turning the
washer(D) and screw (E) clockwise
Step 5
Insert the bulbs (J) into the socket (I).
Step 6
connect Frame(K) to the Top Hood(L)by using 2pcs Studs(M) and
washer(D) .
PLEASE USE TYPE"C" BULB MAX 40-WATT OR CFL
BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS 1PC ST58 4 WATT LED BULB IN THE BOX
ENJOY YOUR LAMP
2
