PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
2/2
Step 1
Step 2
Step3
Make sure all parts could be aligned before assemble
Unpack all parts from cartons carefully.
Insert the Harp (O) into the Saddle (I).
Put the light on a level surface to check
Fix the Connected rod(C) and the Metal box(D)
Put the shade(P) on the Harp(O), then
if everything is stable.
on to the Metal frame(A,B)with screws(U) by using
Tighten the Finial (Q) into the Harp (O)
the spannel(T).
Insert the bulb(N) into the socket(J).
Put tube cover(G) on to the tube (F), Insert the Socket
Put the glass plate (R) on the metal farme
assembly(H) into the tube(F).
Put the sheet iron(K),(L) on the threaded of the bottom of tube(F)
insert the tube(F) into middle hole of the metal box(D).
After adjusting the positive direction,then fix it
After adjusting the positive direction,then fix it
with nut(M) by using the spannel(S).
ENJOY YOUR LAMP
2/2
