x 2
x 4
5
12
G
F
G
G
x 2
13
14
13
14
8
9
9
8
STEP9
: Insert Dowel Small (HW5) into Support Frame (G).
Insert Support Frame (G) and secure with Screw M8x39 (HW12)
�ghten screws into Frame Door (F).
STEP10
: Insert Pin Per Top (HW13) and Pin Sliding Bo�om (HW14)
into Frame Door.
STEP11
: Insert Handle (HW8) and Screw M4x22 mm (HW9)
into Frame Door.
STEP12
: Peel the back paper of Bumper (HW10) then place on both frame door,
posi�on as shown in the figure.Hold the frame door with posi�on of
the upper pin shown in facing upward. Put the frame door by inser�ng it
to the upper groove on Bo�om Board (1), then place the lower part
aligned into the groove on Top Board (2). Repeat this step
for the other door.Slide the doors to right and le� ensuring
the doors has been placed properly in the provided track.
13
10
1
14
2
13
