23
R
R
1
2
5
14
STEP28
: Assembly is complete.
x 2
21
22
R
UPPER SIDE
BOTTOM SIDE
22
22
21
STEP25
: Insert Pin Sliding Top (HW21) and Pin Sliding Bo�om (HW22)
on both end of frame door as specified posi�on in the figure.
STEP26
: Peel the back paper of Bumper (HW23) then 2 pcs on
Frame Door Le�, 1 pc on Frame Door Right, posi�on as shown
in the figure.
Hold the frame door with posi�on of the upper pin shown in
facing upward. Put the frame door by inser�ng it to the upper groove
on Top Board, then place the lower part aligned into the groove
on Fixed Shelf. Repeat this step for the other door.
Slide the doors to right and le� ensuring the doors has been
placed properly in the provided track.
90
°
STEP27
: Use Wedge (HW5), Screw M 3.5 x15.5 (HW14) to �ghten
the back of Media Stand by using screwdriver. Please align the top board
and bo�om board in 90
O
posi�on against the side board, before securing
the wedges (HW5).
