Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Connect the armrests(3) to seat(2) by using four
Long Screws(10) and four Screw Covers(12).
Now insert the small end of Cylinder Column (5)
into Control Mechanism (4) and carefully press
downward with moderate force until it is fully
seated.
The chair is ok now.
ATTENTION: MAKE SURE ALL SCREWS ARE
FULLY TIGHTENED BEFORE USING CHAIR
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents
list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Wrench
Insert five Casters (7) into Star Base (6), push
hard until you feel or hear the Caster(7) snap
into place. Insert the LARGE end of Cylinder
Column (5) into the Star Base (6) and carefully
press downward with moderate force until it is
fully seated.
Attach Control Mechanism (4) to Seat Assembly (2)
with the arrow towards the front of the chair, using
four Washers (11) and two Short Screws(8),two
Medium Screws(9).
Assemble the Seat(2) to the Back(1)
together,using four Medium Screws(9) and
four Washers(11).
FULLY TIGHTEN ALL SCREWS USING
ALLEN WRENCH
