A
B
B
8X
STEP2
PUT THE WASHERS (H2) ON THE ALLEN
BOLT (H1) IN THE ORDER SHOWN IN THE
PICTURE
STEP3
INSERT ALLEN BOLT WITH WASHER INTO
THE BOTTOM PANEL HOLE AS SHOWN AND
TIGHTEN WITH ALLEN KEY(H3).
STEP1
OPEN THE ZIPPER ON THE INSIDE OF THE
DRAWER AND TAKE OUT LEGS AND HARDWARE
The legs and hardware are located inside the door
PREPARATION
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
* If any part is missing or damaged, do not a empt to assemble the pdoduct.
* Es mated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
contents list and hardware contents list.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
STEP2
PLACE THE MEDIA UPSIDE DOWN ON A CLEAN SURFACE . ALIGN LEG (B) HOLES WITH THE MEDIA SIDE HOLES, INSERT ALLEN BOLT
Hw3
Hw1
Hw2
8X
A
B
B
STEP3
REPEAT STEP 2 FOR ,OTHER SIDE LEG, FLIP THE MEDIA UPRIGHT WITH HELP.
(Hw1), WITH WASHER (Hw2) AND TIGHTEN WITH ALLEN KEY (HW3).
A
Hw1
Hw2
Hw3
Hw1
Hw2
PREPARATION
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
* If any part is missing or damaged, do not a empt to assemble the product.
* Es mated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
contents list and hardware contents list.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
Leg
STEP1
Unwrap the legs & take out legs.
Hardware
Open the hardware pouch & take out hardware.
A
B
B
STEP2
Place the media upside down on a clean surface.
Align legs on both sides of media unit as per side holes
present on either side of media.
STEP3
Put the washer on the Bolt in the order shown in
picture.
Hw2
STEP4
Insert Allen Bolt (Hw1) with Washer (Hw2)
ghten with Allen Key (Hw3).Don’t over ghten.
Hw1 Hw3
Hw2
Hw1
Hw2
Hw1
Hw3
STEP5
Repeat step 4 for, other side leg, flip the media upright with help.
OLD
