PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
*If any part is missing or damaged, do not a�empt to assemble the product.
*Es�mated Assembly Time: 90 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email
x 2
x 4
x 2
1
A
M
O
N
4
4
4
1
C
1
RM35A
RM35A
4
4
D
2
C
M
N
STEP5
: Insert Cambolt (HW1) into Top Board (A). Insert Dowel Big (HW4)
into Support Board (M),Back Board (O) and Support Board 2 (N).
STEP6
: Insert Dowel Big (HW4) and Cambolt (HW1) into Side Board Le�
(C) and Side Board Right (D). Con�nue with securing part of the Drawer
Runner (HW RM35A) into posi�on as the above image, using screw
M6x10.5mm (HW18).
STEP7
: Part of Drawer Runner must be installed to Center Board (L) on
both sides. Start with the side which has Camlock hole (see arrow).
Secure part of the Drawer Runner (HW RM35A) into posi�on as the
above image, using screw M6x10.5mm (HW18), then flip the board to
access the opposite surface. Con�nue to secure part of metal runner
(HW RM35A) on the surface using screw M6x10.5mm (HW18).
STEP8
: A�ach Support Board 1 (M) and Support Board 2 (N) into Side
Board Le� (C). Insert Camlock (HW2) then �ghten using screwdriver.
18
RM35A
RM35A
1
18
1
L
L
4
18
18
Styrofoam