PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
*If any part is missing or damaged, do not a�empt to assemble the product.
*Es�mated Assembly Time: 90 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email
14
14
14
15
15
15
11
RM30A
11
11
RM30A
RM30A
21 22
21
21
22
22
x 2
1
4
4
5
4
6
6
A
H
E
F
O
STEP5
: Use Screw M4x22mm (HW15) to a�ach Handle (HW14)
to the Front Drawers as above image.
STEP6
: Bring the three Drawers from previous step upside down
Install the drawer runner (HW RM30A) into posi�on as shown in picture.
Secure with screws M3.5x13mm (HW11)
STEP7
:Insert the Screw M3.5x15.5mm (HW22) and wedge (HW21)
into the bo�om of the drawer according to the picture.
STEP8
: Let start assembly the body of media stand. Insert Cambolt (HW1) into Top Board (A).
Insert Dowel Medium 8x30mm (HW4) into Fixed Shelf (H) . Insert Dowel Medium 8x30mm (HW4)
into Center Boards (E&F) in the same edge with large hole on the board showing in the image.
Then insert Dowel Big 8x50mm (HW6) , on the opposite edge of Center Boards (E&F) and
insert Dowel Small 6x30mm (HW5) into Support Board (O) shown in the image.
50 - 60 mm
30 mm
