PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15minutes.
Tools Required for Assembly (included):
Allen key
/wrench
PREARATION
STEP3
Rotate the slat legs G to the middle rod F
of slat E. Put it inside the middle of the bed,
And then, smooth the slat E inside the bed.
Assembl the slat legs"H" with part of
Assembl the slat legs"H" with part of
Assembl the slat legs"H" with part of
Assembl the slat legs"H" with part of
X2
D
X2
A
STEP2
Attach the sideboard C with headboard A and footboard B
by sliding the iron plates onto the bolts , the metal card should be
alignment card slot when install it, then press it lightly. Reminder: If
it's hard to install, you can rotate out the bolts first, and then put the
iron plates here before tighten.
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
STEP4
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
Rotate the slat legs H to the middle rod of slat
Rotate the slat legs H to the middle rod of slat
STEP5
Secure the slat with screw HW1 by using
wrench HW6.There are totally 9 holes on slat
to make sure it stable, it's shown in step 4
F
E
G
STEP4
Secure the slat with screw HW1 by using
wrench HW6.There are totally 12 holes on slat to
make sure it stable, it's shown in step 3.
The legs and hardware are located inside the sideboard&slat boxs.
X2
HW4
HW5
HW2
HW3
B
STEP1
Attach bed legs D with headboard A and
footboard B by using Allen key HW5 and hardware
HW2, HW3 and HW4 as shown, tighten until secure.
C/L
C/R
HW1
HW6
It's finished as shown,Your Bed is
ready for use.
