PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15minutes.
Tools Required for Assembly (included):
Allen key
/wrench
PREARATION
Assembl the slat legs"H" with part of
Assembl the slat legs"H" with part of
Assembl the slat legs"H" with part of
Assembl the slat legs"H" with part of
STEP4
Attach the STEP3 part with STEP1 by sliding
the iron plates onto the bolts. The metal card should
be alignment card slot when install it,then press it
lightly.Reminder: If it's hard to install, you can rotate out
the bolts first, and then put the iron plates here before
tighten.
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
STEP4
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
Rotate the slat legs H to the middle rod of slat
Rotate the slat legs H to the middle rod of slat
STEP5
Secure the slat with screw HW1 by using
wrench HW6.There are totally 9 holes on slat
to make sure it stable, it's shown in step 4
F
G
E
The legs and hardware are located inside the sideboard&slat boxs.
D
X2
A
HW4
HW5
HW2
HW3
STEP1
Attach bed legs D with headboard
A by using Allen key HW5 and hardware
HW2,HW3,HW4 as shown, tighten until
secure.
and secure the slat with screw HW1 by using
wrench HW2.There are totally 9 holes on slat
to make sure it stable, it's shown in step 3.
Secure the sideboard with headboard with HW1
STEP6
Secure the slat with screw HW1
by using wrench HW6.There are totally 9
holes on slat
to make sure it stable, it's
shown in step 5.
STEP5
Rotate the slat legs G to the middle
rod of the slat F. Put it inside the middle of
the bed. And then, smooth the slat E inside
the bed.
HW1
HW6
D
B
C
It's finished as shown,Your Bed is
ready for use.
HW6
HW6
STEP2
Attach the sideboard C with
footbaord B by sliding the iron plates onto
the bolts. The metal card should be alignment
card slot when install it,then press it lightly.
STEP3
Attach bed legs D with STEP2 part
by using Allen key HW5 and hardware
HW2,HW3,HW4 as shown, tighten until
secure.
HW4
HW5
HW2
HW3
HW1
HW6
STEP7
Secure the sideboard with headboard
by using screw HW1 and wrench HW6. There
are three holes here on each side to make
sure it stable enough.
