PREPARATION
The legs and hardware are located inside the sideboard&slat boxs.
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15minutes.
Tools Required for Assembly (included):
Allen key
/wrench
PREARATION
STEP1
Open the velcro on the headboard A, attach the
leg part of headboard B to the headboard A by using
allen key HW5 and hardware HW2, HW3, HW4 as
shown, tighten until secure, Then smooth the velcro.
STEP4
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And then,
smooth the slat F inside the bed
HW1
Assembl the slat legs"H" with part of
Assembl the slat legs"H" with part of
Assembl the slat legs"H" with part of
Assembl the slat legs"H" with part of
STEP5
Secure the slat with screw HW1 by using
wrench HW6.There are totally 12 holes on slat to
make sure it stable, it's shown in step 4
HW5
HW2
HW3
HW4
STEP2
Open the velcro on the footboard C, attach the leg
parts of footboard D to the footboard C by using allen key
HW5 and hardware HW2,HW3,HW4 as shown, tighten until
secure. Then smooth the velcro.
HW5
HW2
HW3
HW4
STEP3
Attach the sideboard E with headboard(Step1)
and footboard(Step2) by sliding the iron plates onto the
Bolts, The metal card should be alignment card
slot when install it,then press it lightly.
G
H
HW6
It's finished as shown,Your Bed is
ready for use.
HW6
X2
F
B/L B/R
A
C
D/L D/R
E/L
E/R
