Copyright Safari 4x4 Engineering Pty Ltd Melbourne Victoria Australia
Page 4 of 5
11.
Ensure the inner duct is hard up against the shoulder on the snorkel body.
With the inner duct correctly positioned at either end, secure the duct to the
snorkel body using self tapping screw (Item no. 7). With the hose and hose
clamps correctly positioned on both ducts, fasten the hose clamps.
12.
Re-install the aerial assembly and the side indicator, check the operation of
both the aerial and side indicator before installing the wheel arch liner.
13.
Install the air ram assembly to the snorkel body, and fasten the hose clamp.
NB: It is the
installer’s responsibility to ensure all connections are water
tight.
