11
Encoding Configuration:
Once the encoder(s) have been configured for your network, you may proceed to configure the remaining
settings.
1.
Power off the encoder.
2.
Connect the media source (cable tuner or other device) to the encoder by using the HDMI, component
(YPbPr) or composite (CVBS) cables included.
3.
Power on the encoder and continue encoder configuration
.
Encoder Overview:
The encoder Overview page provides an overview of the current encoder settings and a preview of the encoder
output. The Overview page is accessible without a username and password.
Directly to the right of the “Welcome!” label is the unit identification link. Clicking on this link allows
administrators to easily identify a specific encoder by flashing the CFG LED on the encoder front panel. To
disable, simply click on the unit identification link again.
