
SPECTRUM COMPACT (FW 3.31)
USING SPECTRUM COMPACT
30
2.10
POWER IN BAND menu
POWER IN BAND menu allows measuring input power for the desired bandwidth
(BW). Prior to enabling POWER IN BAND it is required to specify bandwidth in MHz by
entering a value via numpad. The default value is 56 MHz.
When bandwidth is defined, POWER IN BAND can be activated in the following
ways:
-
by tapping the SET TO CENTRE button (power in band area will be centred to
the current CENTRE frequency);
-
by tapping CENTRE MHz, and entering the required frequency manually via
numpad and tapping the ENTER or CENTRE MHz buttons;
-
by tapping anywhere on the spectrum grid.
When POWER IN BAND is active, the POWER IN BAND menu button is coloured
green
in the HOME screen and an indication is shown in the top left corner of the
screen.
POWER IN BAND cannot be active together with MARKER. If MARKER is activated,
POWER IN BAND will be automatically deactivated
Tap the Power in Band indication in the top left corner of the screen to display
larger digits.
Tap left or right on the grid to move the centre frequency of Power in Band left
or right.
POWER IN BAND mode