2
Notes, Cautions, and Warnings
Before starting any work on the unit, read and understand all
the safety procedures presented in this manual. This manual
contains the terms “NOTE”, “IMPORTANT”, “CAUTION”, and
“WARNING” followed by important product information.
These terms are defined as follows:
NOTE:
Includes additional information to enable accurate
and easy performance of procedures.
IMPORTANT:
Includes additional information that
if not followed could lead to hindered
product performance.
Used without the safety alert symbol,
indicates a potentially hazardous
situation which, if not avoided, could
result in property damage.
Indicates a potentially hazardous
situation which, if not avoided, could
result in minor or moderate injury.
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury.
Contents
Contents Page
Introduction ......................................................................... 2
Warranty .............................................................................. 2
Notes, Cautions, and Warnings ............................................. 2
Section 1 – General Safety Instructions ................................ 3
Section 2 – Model Identification........................................... 4
Section 3 – TS and USR Series Nomenclature ........................ 4
Section 4 – Welding Standards ............................................. 5
Section 5 – NS-65-28 Welding Specification ......................... 6
Section 6 – NS-65-30 Welding Specification ......................... 7
TS Series Mechanical Suspension Exploded View .................. 8
TS Series Mechanical Suspension Parts List ........................... 9
USR Series Mechanical Suspension Exploded View ............. 10
Contents Page
USR Series Mechanical Suspension Parts List ...................... 11
Service Repair Kits ............................................................. 12
Section 7 – Trunnion Bushing Replacement
and Installation ................................................ 14
Section 8 – Trunnion Clamp Replacement
and Installation ................................................ 15
Section 9 – Axle alignment Procedures ............................... 18
Section 10 – Axle alignment Tips ........................................ 18
Section 11 – Spring End Pad Replacement .......................... 19
Section 12 – Pre-Operation Check List ................................ 20
Section 13 – Torque Specifications ..................................... 21
Section 14 – Routine Maintenance and Daily Inspection ..... 22
Introduction
This manual provides the necessary information for the installation,
adjustment, inspection, and operation of the SAF
®
TS and USR
Series Mechanical Suspensions.
Read this manual before using or servicing this product and
keep it in a safe location for future reference. Updates to this
manual, which are published as necessary, are available on
the internet at www.safholland.us.
Use only SAF-HOLLAND
®
Original Parts to service your
TS
and USR Series Mechanical Suspensions. A list of technical
support locations that supply SAF-HOLLAND Original Parts
and an Aftermarket Parts Catalog are available on the internet
at www.safholland.us or contact Customer Service at 888-396-6501.
Warranty
Refer to the complete warranty for the country in which
the product will be used. A copy of the written warranty is
included with the product or available on the internet at
www.safholland.com.
XL-MS196 Rev E · 2019-04-30 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
