Modular Fast Ethernet Bridge Management System Technical Description and Configuration Guide
V. 3.12. 1.0
·
© SAF Tehnika A/S 2003
7
Table 3. Rear side LEDs
The rear side LEDs refer to the operation of Ethernet port on the management
module board.
LED
Description
A
If blinking (with a period of about 1 sec.), indicates operation of the
management module CPU;
B
If lit, indicates that Ethernet link is established with the
management terminal;
C
If blinking, indicates data interchange between the IDU and the
management terminal;
Note:
A, B and C correspondence to LEDs is shown in the figure below.
Figure 2. CFM-34 Remote Fast Ethernet Bridge rear side panel LEDs
For more information on Reset button please refer to the section 4.2.3.
2.1 Labelling
The IDU label is found at the rear panel;
P/N – product number, the last two numbers denote the product version;
S/N – serial number.
The combination of product number and serial number uniquely identifies each unit.
Figure 3. Label of the CFM-34-REBM IDU
A
B
C
Hidden reset
button