Type 90S18L
Type 90S18L
Installation with
flange design
+GF+
Design
Trailer plate thickness in mm
D-value in kN
ECE approval no.
D-value in kN
type
90
165
S18
16
L
16
320
E1 55R–01
2425
320
102 021
The pins of SAF type
90S18L
can be installed with the corresponding flange
designs of +GF+.
2 Ordering spare parts
When ordering original spare parts from SAF-HOLLAND, make sure that
you pay attention to the assembly groups of the respective product.
Third party parts have a negative effect on the function of the product,
have a shorter lifetime and cause risks and hazards which SAF-HOLLAND
cannot evaluate. They also increase the testing requirement.
SAF-HOLLAND has a tight service network of partner companies for
technical support for SAF-HOLLAND products and supply of parts (see back
page or visit us on the internet at
www.safholland.com
).
For further instructions on identifying spare parts, refer to the
"Aftermarket" section of our homepage
www.safholland.com
.
Updates are published as necessary on the internet at
www.safholland.com
.
3 General information
3.1 Liability
SAF-HOLLAND's "General Terms and Conditions" apply.
2 Ordering spare parts
11
XL-KP11695BM-en-DE Rev. A · 02.2015 · Errors and changes excluded · © SAF–HOLLAND
en
Summary of Contents for 50S15
Page 31: ......
