manualshive.com logo in svg

SAF-HOLLAND Holland FWS1, Replacement Manual

Share
Download
SAF-HOLLAND Holland FWS1 Replacement Manual Download Page 2

2

XL-FW20017RM-en-US · 2014-06-02 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF, and 

logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.

Model Identification

1. Model Identification

This manual contains the installation procedures for SAF-HOLLAND

®

 

replacement kits RK-10990 and RK-11112. Before replacement, 
verify the correct replacement kit for the fifth wheel top plate 
being repaired.

Fifth wheel serial tags are located on the left side of the 
fifth wheel top plate above the fifth wheel bracket pin, or on 
the pickup ramps as illustrated. The part number and serial 
number are listed on the tag as indicated 

(Figure 1)

.

Figure 1

U.S. AND FOREIGN PATENTS APPLY

Model No.  XXXXXXXXXXXX

Serial No.  XXXXXXXXXXXX

FAILURE TO PROPERLY INSTALL, MAINTAIN & OPERATE
THIS PRODUCT COULD RESULT IN TRACTOR TRAILER
SEPARATION CAUSING SERIOUS INJURY OR DEATH.

MADE IN

XXXXXX

Summary of Contents for Holland FWS1













Reviews:

No comments

Brands by name

Popular brands

Load more brands